Repository navigation
Tasmota on ESP32 "advertises" as "ready for commissioning" with Matter when it is not on commissioning mode #24027
|
Tasmota 14.3.0 standard version running on ESP32. I'm experimenting with Matter. While it deos work well with Matter I noticed that Tasmota is advertising that it is in commissionable mode when it is not. My Tasmota device is at address 192.168.1.115 and the capture below comes from it. Furthermore advertasing this on mDNS means that the device is in commissioning mode but it is not. Commissioning mode must be start manually and lasts 10 minutes. Frame 13903859: 341 bytes on wire (2728 bits), 341 bytes captured (2728 bits) on interface \Device\NPF_{B1732F1B-3028-4851-B79B-EF51C35ACB99}, id 0 PROBLEM DESCRIPTIONA clear and concise description of what the problem is. REQUESTED INFORMATIONMake sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!
Configuration output here:
Rules output here:
STATUS 0 output here:
Console output here:
TO REPRODUCESteps to reproduce the behavior: EXPECTED BEHAVIOURA clear and concise description of what you expected to happen. SCREENSHOTSIf applicable, add screenshots to help explain your problem. ADDITIONAL CONTEXTAdd any other context about the problem here. (Please, remember to close the issue when the problem has been addressed) |
Replies: 3 comments
|
Converted to discussions, since issue template not filled and not latest Tasmota version used. |
|
Sorry. Moving to another one that has SAME problem and has LATEST Tasmota version 15.1.0. IP address is 192.168.1.125. Here is the Template {"NAME":"ESP32-DevKit","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1} Here is the WireShark capture that confirms the problem Frame 18573482: 341 bytes on wire (2728 bits), 341 bytes captured (2728 bits) on interface \Device\NPF_{B1732F1B-3028-4851-B79B-EF51C35ACB99}, id 0 |
Fixed in #25069
Thanks for the analysis